下载中心：

📄 Document Information

Model: YD-1200F

Product Name: Cigarette Packaging QR Code Destruction System

Document Type: Technical Datasheet and Project Solution

Equipment Type: Wide-Feed Industrial Paper Shredder / Printed Packaging Shredder / QR Code Destruction Equipment / Conveyor-Fed Shredding System

Applicable Material: Cigarette-packaging sheets, printed outer-packaging paper and similar paper-based packaging waste

File Name: yuedu-yd-1200f-cigarette-packaging-qr-code-destruction-system-datasheet.pdf

Brand: Shanghai YUEDU Technology Co., Ltd.

————————————————————

📥 Download Information:

Download the complete YUEDU YD-1200F technical datasheet for equipment selection, cigarette-packaging waste processing, QR code and printed-information destruction, large-format packaging-paper shredding and conveyor-fed destruction-system evaluation.

yuedu-yd-1200f-cigarette-packaging-qr-code-destruction-system-datasheet

————————————————————

📌 1. Product Overview

The YUEDU YD-1200F is a conveyor-fed industrial shredding system developed for cigarette-packaging sheets and other large-format printed packaging paper.

The system consists of an approximately 3m-long infeed conveyor, a wide-feed shredding unit, an electrical control system and a discharge conveyor. Its effective feed width is approximately 980mm, allowing large printed sheets to be laid flat and conveyed continuously into the shredding chamber.

The reference output size is approximately 5–7mm wide and no more than 18mm long. The particle length can be adjusted according to the customer’s destruction requirements. This cutting process is intended to destroy QR codes, printed information and other identifiable content appearing on rejected packaging sheets.

The discharge conveyor can be manufactured in a length of approximately 2000–3000mm according to the site layout. A transparent acrylic safety enclosure allows operators to observe the discharged material while reducing the risk of contact with moving components.

————————————————————

📌 2. Key Features

✔ Designed for destroying QR codes and printed packaging information

✔ Suitable for cigarette-packaging sheets and large-format printed paper

✔ Approximately 980mm effective feed width

✔ Approximately 3000mm-long infeed conveyor

✔ Reference shred width of 5–7mm

✔ Reference particle length of no more than 18mm

✔ Adjustable particle length

✔ Reference capacity of 1200–1800kg/h

✔ Approximately 23kW total installed power

✔ 380V industrial electrical configuration

✔ Integrated discharge conveyor

✔ Customizable discharge-conveyor length

✔ Transparent acrylic discharge protection

✔ Suitable for flat feeding of complete large-format sheets

✔ Customizable according to material, site and output-size requirements

————————————————————

📌 3. Main Technical Specifications

SpecificationYD-1200F

Applicable MaterialCigarette-packaging sheets and large-format printed packaging paper

Reference Shred Width5–7mm

Reference Particle LengthNo more than 18mm; adjustable

Recommended Feeding ThicknessNo more than 3mm per feed

Maximum Thickness Stated in SourceUp to 10mm

Infeed Conveyor DimensionsApprox. 3000 × 1100mm

Effective Feed WidthApprox. 980mm

Discharge Conveyor LengthApprox. 2000–3000mm; made to order

Discharge Conveyor WidthApprox. 980mm

Discharge ProtectionTransparent acrylic safety enclosure

Reference Capacity1200–1800kg/h

Total Installed PowerApprox. 23kW

Power Configuration18.5kW + 3.0kW variable-frequency system + 1.5kW

Operating Voltage380V

Reference Dimensions in Specification Table6363 × 1800 × 2045mm

Reference Overall Length in DrawingApprox. 6363mm

Control SystemSeparate electrical control cabinet

Note: The stated capacity of 1200–1800kg/h. Actual capacity depends on the paper composition, thickness, dimensions, condition, feeding density, required particle size and operating method.

————————————————————

📌 4. QR Code and Printed-Information Destruction

The YD-1200F is primarily intended to process cigarette outer-packaging paper bearing QR codes, text, graphics, batch information or other identifiable printed content.

The machine reduces complete sheets into particles approximately 5–7mm wide and no more than 18mm long, disrupting the integrity of the original QR codes and printed information.

Typical applications include:

✔ Destruction of rejected cigarette-packaging prints

✔ Processing of printing setup and test sheets

✔ Destruction of packaging paper bearing QR codes

✔ Disposal of obsolete or invalid packaging materials

✔ Shredding of printed production waste

✔ Prevention of unauthorized reuse of rejected packaging

✔ Centralized waste processing by packaging printers

The actual destruction result depends on QR-code dimensions, printed layout, cutting direction and final particle size. Sample testing is recommended when the project has a defined destruction standard.

————————————————————

📌 5. Wide-Feed Conveyor System

The YD-1200F incorporates an infeed conveyor measuring approximately 3000 × 1100mm, with an effective loading width of approximately 980mm.

This wide-feed arrangement helps:

✔ Reduce the need to pre-cut large printed sheets

✔ Provide space for arranging and continuously loading material

✔ Keep large sheets flat as they enter the shredder

✔ Improve the processing efficiency of bulk printing waste

✔ Reduce the need to manually push sheets toward the cutters

✔ Establish a continuous production-line workflow

The feed width does not represent the allowable material thickness. The total thickness of stacked sheets must remain within the specified feeding limit.

————————————————————

📌 6. Output Size and Adjustment

The reference output specifications are:

Particle width: 5–7mm

Particle length: no more than 18mm

Particle length: adjustable according to project requirements

The required output size should be confirmed according to:

✔ Dimensions of the QR codes and printed information

✔ Required destruction result

✔ Paper thickness and physical properties

✔ Required processing capacity

✔ Downstream collection or recycling method

✔ Whether subsequent compaction or baling is required

A smaller particle size generally provides more thorough disruption of printed information but may affect processing capacity. The destruction result and required throughput should therefore be evaluated together.

————————————————————

📌 7. Feeding-Thickness Guidance

The machine can process material up to approximately 10mm thick. For safe, stable and long-term operation, however, the recommended feeding thickness is no more than 3mm per feed.

For the cigarette-packaging application described in the source document, no more than approximately three sheets should be fed together during extended operation.

Following the recommended feeding limit helps:

✔ Maintain stable material feeding

✔ Reduce instantaneous overload

✔ Reduce blockages caused by excessive stacking

✔ Extend cutter and transmission-component service life

✔ Maintain more consistent output dimensions

✔ Improve continuous operating reliability

————————————————————

📌 8. Complete and Irregular Material

The YD-1200F is better suited to complete or large-format packaging sheets laid flat on the infeed conveyor.

Small, irregular or previously broken pieces may enter the cutters in different directions, resulting in a higher proportion of irregularly sized particles.

Accordingly:

✔ Complete large sheets are suitable for continuous flat feeding

✔ Small pieces may produce more irregular particles

✔ Actual capacity may change when processing loose fragments

✔ Sample testing is recommended when particle uniformity is important

✔ Conveyor speed and loading method should match the material condition

————————————————————

📌 9. Discharge Conveyor and Transparent Protection

The YD-1200F uses a discharge conveyor to transfer shredded cigarette-packaging paper away from the main cutting unit.

The reference conveyor width is approximately 980mm. Its length can be manufactured at approximately 2000–3000mm to suit the installation space and downstream collection method.

A transparent acrylic enclosure can be installed over the discharge area to:

✔ Allow observation of the discharged material

✔ Reduce the possibility of contact with moving components

✔ Help contain lightweight shredded particles

✔ Improve operational safety around the conveying area

✔ Make material accumulation or conveying abnormalities easier to identify

The acrylic enclosure is part of the safety-protection system and should not be removed, opened or bypassed while the equipment is operating.

————————————————————

📌 10. Reference Processing Capacity

The source document states a reference capacity of 1200–1800kg/h.

Actual throughput depends on:

Packaging-paper composition and basis weight

Sheet dimensions and thickness

Whether the material is complete or fragmented

Number of sheets loaded together

Infeed-conveyor speed

Required final particle size

Whether the material is damp, folded or stuck together

Continuity of material loading

Actual cutter and transmission configuration

On-site operating conditions

Representative material should be supplied for testing or technical confirmation before final quotation and manufacture.

————————————————————

📌 11. System Components and Workflow

The YD-1200F system mainly consists of:

✔ Infeed conveyor

✔ Wide-feed shredding unit

✔ Cutter and transmission system

✔ Discharge conveyor

✔ Transparent acrylic safety enclosure

✔ Separate electrical control cabinet

✔ Supporting frames and protective covers

Typical workflow:

Cigarette-packaging sheets are arranged flat on the infeed conveyor

The conveyor feeds them continuously into the shredding unit

The cutters reduce the sheets to approximately 5–7mm wide and no more than 18mm long

Shredded material falls onto the discharge conveyor

Operators can observe the discharge through the transparent enclosure

The particles are conveyed to the customer’s collection or downstream processing area

————————————————————

📌 12. Installation and Dimension Confirmation

Before installation, customers should confirm:

✔ Final overall length, width and height

✔ Infeed- and discharge-conveyor lengths

✔ Operating and maintenance clearances

✔ Electrical-cabinet position

✔ Material-collection area

✔ Floor capacity and anchoring requirements

✔ 380V electrical supply

✔ Connection points for upstream and downstream equipment

Final installation dimensions should be based on the approved manufacturing and layout drawings.

————————————————————

📌 13. Information Required for Equipment Selection

Customers should provide:

Exact material description

Paper composition, basis weight and thickness

Maximum sheet length and width

Whether the material consists of complete sheets or loose fragments

Required hourly capacity

Planned daily operating time

Required final particle size

Actual QR-code or printed-information dimensions

Any required destruction standard

Available floor space and layout drawing

Required infeed- and discharge-conveyor lengths

Downstream collection, bulk-bag, compaction or baling method

Site voltage and frequency

Required interlocking, automation or safety functions

Representative material testing is recommended to confirm the output size, reference capacity and QR-code destruction result.

————————————————————

📌 14. Datasheet Includes

✔ YD-1200F product and system introduction

✔ Cigarette-packaging QR-code destruction requirements

✔ Main technical specifications

✔ Output-size and adjustment information

✔ Recommended feeding thickness

✔ Infeed-conveyor dimensions

✔ Discharge-conveyor configuration

✔ Transparent acrylic safety enclosure

✔ Reference processing capacity

✔ Multi-angle system photographs

✔ Structural and reference-dimension drawing

✔ Electrical power configuration

✔ Large-format packaging-sheet application information

————————————————————

📌 15. Why Choose YUEDU

✔ Specialized in industrial shredding and secure destruction equipment

✔ Customized systems for cigarette-packaging QR-code destruction

✔ Approximately 980mm wide-feed design

✔ Flat feeding of large-format packaging sheets

✔ Adjustable output length

✔ Integrated feeding, shredding and discharge process

✔ Transparent safety protection over the discharge area

✔ Customer-material testing support

✔ Conveyor dimensions adaptable to the installation site

✔ Customized systems based on capacity and downstream processing

————————————————————

📞 Contact Us

Shanghai YUEDU Technology Co., Ltd.

☎️  Phone: +86 159 0178 2779 (WhatsApp / WeChat / Facebook / Telegram)

————————————————————

上一篇：【文档下载】YD-1200F烟包二维码粉碎销毁系统技术资料（越都）

下一篇：[Download] YD-DZ2000 Heavy-Duty Swing-Arm Single-Shaft Shredder Datasheet | YUEDU