下载中心：

📄 Document Information

Product Model: YD-CD02

Product Name: Coin Deformation System

Document Type: Technical Solution

Equipment Type: Coin Deformation Equipment / Withdrawn-Coin Processing System / Central-Bank Coin Destruction System

File Name: yuedu-yd-cd02-coin-deformation-system-technical-solution.pdf

Document Language: English

Brand: Shanghai YUEDU Technology Co., Ltd.

————————————————————

📥 Download Information:

Click the button below to download the complete YUEDU YD-CD02 Coin Deformation System technical solution.

The document is intended for central banks, mints and authorized coin-processing facilities. It describes a controlled process covering batch registration, authorized loading, conveying, roll-pressure deformation, discharge collection and weight reconciliation.

The technical solution includes system specifications, equipment configuration, enclosure layout, access control, video monitoring, batch weight records, project-confirmation requirements and proposed acceptance considerations.

yuedu-yd-cd02-coin-deformation-system-technical-solution

————————————————————

📌 1. Product Overview

The YUEDU YD-CD02 is an enclosed processing system designed to deform withdrawn coins under controlled conditions.

Coins pass through a holding bin and an infeed conveyor to the roll deformation unit. Applied mechanical pressure bends the coins and damages their surfaces. A discharge conveying unit then transfers the treated material into a collection bin for weighing, batch reconciliation and controlled release.

The system does not shred coins into small metal particles. It uses roll pressure to produce irreversible physical deformation, reducing the possibility of the treated coins being recirculated, reused or restored to their original condition.

The YD-CD02 is intended for central banks, currency-processing organizations, mints and other authorized withdrawn-coin processing facilities.

————————————————————

📌 2. Key Features

✔ Roll-pressure deformation to bend coins and damage their surfaces

✔ Reference processing capacity of up to 100kg/h

✔ 8kW total installed power

✔ Standard 380V, 50Hz electrical configuration

✔ Integrated holding, conveying, deformation, discharge and collection

✔ Enclosed system layout

✔ Key-controlled loading and unloading points

✔ Video monitoring throughout the internal process

✔ Recorded input and output weights

✔ Batch weight reconciliation

✔ Design noise target within 75dB

✔ Enclosure intended to reduce dust leakage

✔ Project-specific configuration based on coin material and dimensions

————————————————————

📌 3. Technical Specifications

Specification  :  YD-CD02

Product Model  :  YD-CD02

Processing Method  :  Roll-pressure deformation

Reference Capacity  :  Up to 100kg/h

Total Installed Power  :  8kW

Standard Power Supply  :  380V / 50Hz

Reference System Layout  :  4500×1500×1800mm

System Structure  :  Controlled enclosure

Loading and Unloading Access  :  Key controlled

Process Visibility  :  Internal video monitoring

Weight Management  :  Recorded input and output weights

Reference Noise Target  :  Within 75dB

Material Collection  :  Discharge conveyor and scrap collection bin

Notes:

The stated 100kg/h is a maximum reference throughput. Actual capacity depends on coin material, diameter, thickness, denomination mix and feeding conditions.

The 4500×1500×1800mm dimensions refer to the design layout shown in the technical solution. Additional space must be provided for operation, maintenance and safe access.

The noise level within 75dB is a design requirement. The measurement position, equipment load and operating conditions should be defined in the project acceptance criteria.

The source document specifies 380V and 50Hz. The electrical configuration for an export project should be confirmed against the destination country’s power supply and applicable regulations.

————————————————————

📌 4. System Configuration

The YD-CD02 Coin Deformation System incorporates:

✔ Coin holding bin

✔ Infeed conveyor

✔ Roll deformation unit

✔ Discharge conveying unit

✔ Scrap collection bin

✔ Controlled enclosure

✔ Video-monitoring system

✔ Input- and output-weight recording equipment

✔ Operating and electrical control system

The final supply scope should be defined in the approved technical agreement and project quotation.

————————————————————

📌 5. Batch Handling Sequence

Register the batch, coin types and starting weight.

Open the loading point under authorized access.

Load the withdrawn coins into the holding bin.

Transfer the coins to the roll deformation unit.

Apply mechanical pressure to bend the coins and damage their surfaces.

Convey the treated coins into the collection bin.

Record the output weight.

Reconcile the input and output weights.

Authorize the release or transfer of the treated metal material.

This workflow supports batch traceability from loading through collection and helps reduce the risk of coin loss, unauthorized removal or material mixing.

————————————————————

📌 6. Security Control and Batch Management

The technical solution includes several functions relevant to controlled coin processing:

✔ Key custody for loading and unloading points

✔ Video monitoring of the internal process

✔ Recorded input weight for each batch

✔ Recorded output weight after treatment

✔ Input and output weight reconciliation

✔ Enclosed material handling and controlled access

✔ Noise and dust-containment requirements

The final project specification should define key custody, camera coverage, recording retention, scale calibration, reconciliation tolerances and procedures for handling residual coins.

Guarding, emergency stops, jam-clearance procedures, power-loss recovery and maintenance access should also be confirmed in the final equipment specification.

————————————————————

📌 7. Project Confirmation and Acceptance

Before final equipment selection, the customer should provide:

✔ Coin denominations and types

✔ Coin materials or metal composition

✔ Coin diameter and thickness

✔ Representative samples

✔ Required daily processing quantity

✔ Planned operating hours

✔ Required final deformation condition

✔ Site voltage and frequency

✔ Available installation and access space

Testing with the agreed coin mix can confirm the deformation result, sustained throughput and material-handling performance.

Acceptance criteria should define whether the coins must be unsuitable for reuse, whether coin features must become unreadable, and whether reassembly or restoration must be prevented. Access control, video coverage, weight reconciliation, noise and containment should also be verified during acceptance testing.

————————————————————

📌 8. Applicable Organizations and Materials

Applicable Organizations:

Central Banks / Mints / Commercial-Bank Cash Processing Centers / National Currency Authorities / Authorized Coin-Processing Companies / Metal-Recovery Facilities

Applicable Materials:

Withdrawn Coins / Demonetized Coins / Recalled Coins / Metal Coins Requiring Permanent Deformation / Different Coin Denominations Confirmed Through Project Testing

Coins from different countries may contain steel, copper, nickel, aluminum, zinc and various alloys, including bimetallic constructions. Final throughput and deformation results should be confirmed through representative sample testing.

————————————————————

📌 9. Technical Solution Includes

✔ YD-CD02 Coin Deformation System overview

✔ System technical specifications

✔ Roll-pressure deformation method

✔ Batch handling workflow

✔ Coin holding bin and infeed conveyor information

✔ Roll deformation unit information

✔ Discharge conveying and scrap collection

✔ Controlled-enclosure system layout

✔ 4500×1500×1800mm reference layout dimensions

✔ Video monitoring and access-control information

✔ Input and output weight-reconciliation requirements

✔ Project confirmation and acceptance considerations

✔ Appearance and construction photographs of previously manufactured YUEDU equipment

Note: Some photographs in the document show previously manufactured YUEDU equipment as references for enclosure design, operator interfaces and access arrangements. The final coin system will follow the approved project configuration and technical drawings.

————————————————————

📌 10. Why Choose YUEDU

✔ Coin deformation equipment and complete processing-system solutions

✔ Sample testing for different coin materials, dimensions and denominations

✔ Combined physical deformation, access control and batch traceability

✔ Conveying, weighing, monitoring and controlled-enclosure configurations

✔ Electrical adaptation according to local project requirements

✔ Support for system design, manufacturing, testing, installation and commissioning

✔ Customized solutions for central banks and authorized coin-processing facilities

————————————————————

📞 Contact Us

Shanghai YUEDU Technology Co., Ltd.

☎️  Phone: +86 159 0178 2779 (WhatsApp / WeChat / Facebook / Telegram)

————————————————————

上一篇：【文档下载】YD-CD02中央银行硬币变形系统技术方案（越都）

下一篇：【文档下载】YD-SPB600纸张粉碎压块系统布局及出料效果（越都）