下载中心：

📄 Document Information

Product Model: SL60120

Product Name: Packaging Waste Shredding and Baling System

Document Type: System Layout / Installation Reference Drawing

Equipment Type: Packaging Waste Shredding System / Industrial Shredder / Conveying System / Waste Baling System

File Name: YUEDU_SL60120_Packaging_Waste_Shredding_and_Baling_System_Layout_EN.pdf

Brand: Shanghai YUEDU Technology Co., Ltd.

————————————————————

📥 Download Information:

Click the button below to download the complete YUEDU SL60120 Packaging Waste Shredding and Baling System layout drawing.

The document presents the reference arrangement of the horizontal conveyor, shredder, extraction fan, material-transfer ducting and baler. It also provides the main motor power, extraction-fan power, screen opening, recessed-pit installation method and principal reference dimensions for preliminary project planning, space evaluation and installation-condition review.

YUEDU_SL60120_Packaging_Waste_Shredding_and_Baling_System_Layout

————————————————————

📌 1. System Overview

The YUEDU SL60120 is an integrated system designed for shredding, volume reduction and centralized baling of packaging waste.

Packaging waste is fed to the shredder by a horizontal conveyor. After shredding and discharge through the screen, the processed material is transferred through the extraction system and associated ducting to the downstream collection and baling section.

The system combines feeding, shredding, material transfer and baling in one process. This arrangement can reduce the space occupied by loose packaging waste and facilitate downstream storage, handling and recycling.

The layout uses a recessed installation pit for the shredder. Positioning the main machine below floor level helps coordinate the conveyor height and the overall process arrangement.

————————————————————

📌 2. Key Features

✔ Integrated conveying, shredding, extraction transfer and baling process

✔ 45kW shredder main motor

✔ 5.5kW extraction-fan motor

✔ 25mm screen opening shown on the drawing

✔ Horizontal conveyor for packaging-waste feeding

✔ Recessed-pit installation of the main shredder

✔ Extraction system for transferring shredded material

✔ Downstream baler for centralized waste handling

✔ Main machine can be separated into major assemblies for site access

✔ Removable upper feed panels for bolted on-site assembly

✔ Reference dimensions for plant height, installation pit and equipment connections

————————————————————

📌 3. System Process

The reference operating sequence is:

Packaging waste is loaded onto the horizontal conveyor

The conveyor feeds the material into the SL60120 shredder

The shredder reduces the packaging waste in size and volume

Processed material passes through the 25mm screen

The extraction fan transfers the shredded material through the ducting

Material enters the downstream collection and baling process

Baled material can be stored, transported or sent for further recycling

The final conveying direction, equipment connections and baling arrangement should be determined according to the site conditions and the approved project layout.

————————————————————

📌 4. Technical and Layout Information

ItemSL60120 Drawing Information

System NamePackaging Waste Shredding and Baling System

Shredder ModelSL60120

Main Motor Power45kW

Extraction-Fan Motor5.5kW

Screen Opening Shown25mm

Feeding MethodHorizontal conveyor

Material-Transfer MethodExtraction fan and transfer ducting

Downstream EquipmentBaler

Shredder InstallationRecessed installation pit

Horizontal Reference Span Shown13000mm

Reference Plant Height Shown6500mm

Reference Pit Depth Shown1500mm

Reference Pit Width Shown3650mm

Local Reference Dimensions2000mm / 1700mm / 800mm

Connection DimensionsTo be confirmed on site

Drawing Unitmm

Notes:

The dimensions above are taken from the source layout and are intended for preliminary planning and site-condition evaluation.

The 13000mm dimension is a horizontal reference span shown on the drawing and should not automatically be treated as the fixed total length of every system.

Connection points, pit dimensions, conveyor elevations and installation clearances should be verified against the actual building conditions.

The source drawing does not specify processing capacity, bale dimensions, bale weight, operating voltage or total installed system power. These parameters should be confirmed according to the material, feeding condition, required throughput and final equipment configuration.

————————————————————

📌 5. Recessed-Pit Installation and Machine Disassembly

The layout specifies that the shredder is installed in a recessed pit.

To accommodate site access, lifting and transportation requirements, the machine can be separated into the following major assemblies:

✔ Center housing

✔ Cutter assembly

✔ Base

✔ Upper housing

✔ Upper sheet-metal components

The upper feed assembly consists of removable panels that can be bolted together after the equipment reaches the installation site.

Project planning should verify:

✔ Factory doors and transportation routes

✔ Lifting equipment and overhead working clearance

✔ Pit length, width, depth and load-bearing conditions

✔ Pit drainage, moisture protection and maintenance access

✔ Connection height between the conveyor and shredder

✔ Installation positions for the extraction ducting and baler

✔ Operating, cleaning and maintenance clearances

Final civil construction should be based on the approved installation and foundation drawings.

————————————————————

📌 6. Applicable Industries and Materials

Applicable Industries:

Packaging Manufacturers / Printing and Packaging Companies / Warehousing and Logistics Centers / Manufacturing Plants / E-Commerce Warehouses / Recycling Companies / Waste-Paper Processors / Industrial-Waste Treatment Facilities

Reference Materials:

✔ Waste cartons

✔ Corrugated cardboard

✔ Packaging paper and paperboard

✔ Paper-packaging offcuts

✔ Printing and packaging waste

✔ Warehousing and logistics packaging waste

✔ Other packaging materials suitable for the SL60120 shredding system

Packaging waste varies in composition, thickness, moisture content, compaction and contaminant content. Representative sample testing is recommended when the waste contains plastic film, metal parts, strapping or other composite materials. Cutter, screen and conveying configurations should be confirmed before final equipment selection.

————————————————————

📌 7. Information Required for System Selection

Before confirming the SL60120 system configuration, customers should provide:

Exact packaging-waste composition

Maximum material dimensions and thickness

Whether the material is loose, compacted or baled

Required hourly or daily processing volume

Required output size after shredding

Required bale dimensions and bale weight

Site voltage and frequency

Available plant height and floor space

Installation-pit construction conditions

Infeed and finished-bale handling methods

Whether the material contains metal, stones or other hard contaminants

Whether dust extraction, separation or other auxiliary equipment is required

————————————————————

📌 8. Document Includes

✔ SL60120 Packaging Waste Shredding and Baling System layout

✔ Horizontal-conveyor arrangement

✔ Shredder installation position

✔ Extraction fan and transfer-duct arrangement

✔ Baler installation reference

✔ 45kW main-motor information

✔ 5.5kW extraction-fan information

✔ 25mm screen-opening information

✔ Recessed-pit installation drawing

✔ Plant-height and local-dimension references

✔ Main-machine disassembly information

✔ On-site assembly instructions for the upper feed section

✔ Requirement for on-site confirmation of connection dimensions

————————————————————

📌 9. Why Choose YUEDU

✔ Specialized in industrial shredding and waste-volume-reduction equipment

✔ Integrated conveying, shredding, transfer and baling solutions

✔ Cutter and screen configurations based on material characteristics

✔ Recessed-pit and customized site-layout design

✔ System arrangements optimized for available plant space

✔ Customer-material testing and equipment-selection support

✔ Support for design, manufacturing, testing, installation guidance and commissioning

————————————————————

📞 Contact Us

Shanghai YUEDU Technology Co., Ltd.

☎️  Phone: +86 159 0178 2779 (WhatsApp / WeChat / Facebook / Telegram)

————————————————————

上一篇：【文档下载】SL60120包装废料粉碎打包系统布局图（越都）

下一篇：没有了！